List of products by brand Integrated Engineering

Carbon lid kit for MK7/MK7.5 Sheet Metal Intake Kit | IEINCI12


LEADING FEATURES




Gain over 10+ horsepower and torque with tuning
Available with optional high gloss carbon fiber lid
Adds aggressive motorsport turbo and engine sound
Full-width air inlet spans entire radiator support
High-flow built in velocity stack & 5" air filter
3.5" intake piping and silicone - removes factory restrictions
Flow-optimized for tuned engines, hybrid turbos, and big turbo kits
Smooth transition 3-ply silicone couplers
Perfect fitment by utilizing factory airbox mounts
Black powder coated inlet pipe and heat shield
Stealth coolant line included at no extra cost
Works with/without SAI - no need to buy an extra kit

€426.85
IE 058 1.8T/06A 1.8T/2.0L/1.8L/16V H-Beam 144x20mm Rod Set with Aftermarket Pistons | IERHVA1-RD
Last items in stock
Product Features 



• 20mm wrist pin works with all aftermarket 20mm pistons and some stock pistons• Forged from vacuum drawn 2 pieces 4340 chrome moly steel• Upgraded H beam design greatly increases strength and durability• Combination tested to 700HP on 4 cylinder engines• Includes IE Spec ARP 2000 rod bolts with "IE" stamp to ensure a genuine product• Individual computer-optimized design to match unique VW/Audi engine applications• Honed to exacting tolerances within 250 millionths of an inch• Optional forced pin oiling (rifle drilling) for long wrist pin life• Each connecting rod set is balanced to weights within +/- 1 gram• Dimensionally and magnaflux inspected to ensure extreme reliability• Multi-stage heat treated for dimensional stability and fatigue life
€631.90
IE 06A 1.8T Manual Timing Belt Tensioner Kit (NO BELT) | IEBEVA5-S15
Last items in stock
DON'T RISK YOUR ENGINE
Save your 1.8T 20V engine from risking a complete failure due to a faulty stock hydraulic tensioner. Upgrading your timing system with our IE Manual Timing Belt Tensioner Kit removes the factory weak link and replaces it with a solid and reliable manual tensioner setup.
€248.03
IE 1.4T TSI MQB Cold Air Intake Kit | IEINCI4
Last items in stock
INCREASE YOUR HORSEPOWER ON YOUR 1.4T




The IE VW Jetta 1.4T Cold Air Intake is the perfect addition to any engine bay. Give your Volkswagen added horsepower, torque, snappier throttle response, and an aggressive turbo sound. Typical peak gains from our CAI are roughly 8-10 Horsepower and Torque.
€376.00
IE 1.8T/2.0T FSI/16V/8V Tuscan I-Beam 144x20mm Rod Set (RIFLE DRILLING INCLUDED) | IERTVA1
Last items in stock
PRODUCT FEATURES



• UNIQUE I-BEAM DESIGN OFFERS INCREDIBLE BENDING AND TORSIONAL STIFFNESS
• INCLUDES IE SPEC ARP 2000 ROD BOLTS WITH "IE" STAMP TO ENSURE A GENUINE PRODUCT
• APPLICATION SPECIFIC DESIGN OPTIMIZED FOR THE MK7/MQB PLATFORM
• INDUSTRY LEADING CONNECTING ROD STRENGTH TO WEIGHT RATIO
• HONED TO EXACTING TOLERANCES WITHIN 250 MILLIONTHS OF AN INCH
• FORCED PIN OILING (RIFLE DRILLING) PROVIDES LONG WRIST PIN LONGEVITY
• EACH CONNECTING ROD SET IS BALANCED TO WEIGHTS WITHIN +/- 1 GRAM
• FORGED FROM VACUUM DRAWN 2 PIECE 4340 CHROME MOLY STEEL
• DIMENSIONALLY AND MAGNAFLUX INSPECTED FOR EXTREME RELIABILITY 
• COMBINATION TESTED TO OVER 1000BHP ON 4 CYLINDER ENGINES
• MULTI-STAGE HEAT TREATED FOR DIMENSIONAL STABILITY AND FATIGUE LIFE

€737.73
IE 2.0L 8V ABA/2.0L 16V ABF H-Beam 159x21mm Rod Set with Aftermarket Pistons | IERHVI1-RD
Last items in stock
2 Piece Forgings from Vacuum Drawn 4340 Chrome Moly Steel

- Multi Stage Heat Treat for maximum strength, dimensional stability, and fatigue life.
- Fully Machined and Shot Peened
- H beam Design
- Tolerances as tight as .0003 ground on Sunnen brand equipment
- Standard ARP2000 Rod Bolts
- Computer Optimized Design
- Magnaflux Inspected
- Dimensionally Inspected
- Packed in balanced sets +/- 1 gram.
- All this at a price point that yields market leading value
- VW Audi1.9L TDI up to 2004 engines
- Combination tested to over 700HP+
€631.90
IE 2.0L PD/CR Tuscan I-Beam Rod Set (RIFLE DRILLING NOT INCLUDED) | IERTVL1
Last items in stock


LEADING FEATURES


UNIQUE I-BEAM DESIGN OFFERS INCREDIBLE BENDING AND TORSIONAL STIFFNESS


INCLUDES IE SPEC ARP 2000 ROD BOLTS WITH "IE" STAMP TO ENSURE A GENUINE PRODUCT


APPLICATION SPECIFIC DESIGN OPTIMIZED FOR THE MK7/MQB PLATFORM


INDUSTRY LEADING CONNECTING ROD STRENGTH TO WEIGHT RATIO


HONED TO EXACTING TOLERANCES WITHIN 250 MILLIONTHS OF AN INCH


FORCED PIN OILING (RIFLE DRILLING) PROVIDES LONG WRIST PIN LONGEVITY


EACH CONNECTING ROD SET IS BALANCED TO WEIGHTS WITHIN +/- 1 GRAM


FORGED FROM VACUUM DRAWN 2 PIECE 4340 CHROME MOLY STEEL


DIMENSIONALLY AND MAGNAFLUX INSPECTED FOR EXTREME RELIABILITY 


COMBINATION TESTED TO OVER 1000BHP ON 4 CYLINDER ENGINES


MULTI-STAGE HEAT TREATED FOR DIMENSIONAL STABILITY AND FATIGUE LIFE 


€400.00
IE 2.0T FSI HPFP Upgrade Kit (INTERNALS ONLY) | IEFUVC1
Last items in stock
Product Features


• Supports Stage 2 and big turbo upgrades
• 50% displacement over OE HPFP
• Powers up to 600HP and 7500 RPM
• Constant diameter piston for long life
• Nitrided surface finish for exact tolerances
• Extreme resistance to wear and abrasion
• Ultralight titanium retainer eliminates valve float
• Retains OE spring to greatly reduce cam follower wear
• Leak-free molybdenum disulphide impregnated seal
• Every kit is tested and verified before shipment
• Engineered, designed, and manufactured  in the USA



€531.84