Alignment

Front Roll Centre/Bump Steer - Correction Kit - W0907
Out-of-Stock

A must for lowered vehicles, Whiteline roll centre, bump steer and camber correction kits are designed to correct roll-centre geometry using specially engineered ball-joints. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip and cornering speeds.
  
Important Notes: Service kit - suits Whiteline KCA313 roll centre/bump steer kit

Suitable for SUBARU 2001-2007 (IMPREZA WRX STI GD)
Front Sway Bar Link Kit - KLC139
Out-of-Stock

Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.
.
Kit Contents:
2 Links, Install Guide

 
Important Notes: 
Adjustable extra heavy duty

Suitable for SUBARU 2001-2007 (IMPREZA WRX STI GD)
Rear Control Arm Lower Front Arm - KTA107
Out-of-Stock

This series of adjustable trailing arms are designed to modify factory camber - toe and track on the rear of Subaru Impreza and Liberty. Use KTA107 as an economical solution for lack of rear toe adjustment particularly on Impreza GD-GH (MY01- on) series. This kit is supplied as 2x adjustable front arms and matching rear arm poly bushings. KTA108 and KTA109 utilize 4 complete adjustable arms with performance low compliance bushings.


 
Kit Contents:
2 Arms, 4 Bushings, 4 Tubes, Install Guide, Grease


 
Important Notes:
Performance arms - on car adjustable front arm and 4 x rear bushings for camber and toe correction.

Suitable for SUBARU 2001-2007 (IMPREZA WRX STI GD)
Rear Sway Bar Link Kit - KLC26
Out-of-Stock

The kit utilizes a high tensile extruded alloy link fitted with ultra-low compliance synthetic elastomer bushings. Critical hardware is replaced with high tensile components to match the higher loads. The result precise and direct roll control with up to 25% more effective bar rate available at lower wheel deflection points. This doesn't mean an outright increase in your bar rate but rather a quickening of its effect allowing more bar rate earlier. Link shape and bush mounts are designed to allow maximum sway bar articulation to ensure full suspension travel.
.
Kit Contents:
2 Links, 4 Bolts, 8 Washers, 4 Nuts, Install Guide, Grease
.

Important Notes:
Extra heavy duty alloy link suits models to MY02

Suitable for SUBARU 2001-2007 (IMPREZA WRX STI GD)         
Rear Sway Bar Link Kit - W23480
Out-of-Stock

The kit utilises a high tensile extruded alloy link fitted with ultra low compliance synthetic elastomer bushings. Critical hardware is replaced with high tensile components to match the higher loads. The result is precise and direct roll control with up to 25% more effective bar rate available at lower wheel deflection points. This doesn't mean an outright increase in your bar rate but rather a quickening of its effect allowing more bar rate earlier. Link shape and bush mounts are designed to allow maximum sway bar articulation to ensure full suspension travel while acting directly under vertical load. 


 
Kit Contents:
2 Links, 4 Bolts, 8 Washers, 4 Nuts, Install Guide, Grease
 
Install Guide: Download Here

Suitable for SUBARU 2001-2007 (IMPREZA WRX STI GD) 

 
Rear Control Arm Lower Front and Rear Arm - KTA123
Out-of-Stock

KTA123 is a complete kit of 4 adjustable control arms fitted with low compliance bushings designed to modify rear factory camber - toe and track. The result is greater range and more precise adjustment and a more direct connection between body and rear suspension.
.


Kit Contents: 
4 Arms, Install Guide, Grease
.


Important Notes: 
Performance arms - on-car adjustable camber and toe correction - suits models MY03 - on - MOTORSPORT

Suitable for SUBARU 2001-2007 (IMPREZA WRX STI GD)
Rear Control Arm Lower Front and Rear Arm - KTA109
Out-of-Stock

This series of adjustable trailing arms are designed to modify factory camber - toe and track on the rear of Subaru Impreza and Liberty. Use KTA107 as an economical solution for lack of rear toe adjustment particularly on Impreza GD-GH (MY01- on) series. This kit is supplied as 2x adjustable front arms and matching rear arm poly bushings. KTA108 and KTA109 utilize 4 complete adjustable arms with performance low compliance bushings. The result is greater range and more precise adjustment and a more direct connection between body and rear suspension delivering more predictable dynamic behavior. 


 
Kit Contents:
4 Arms, Install Guide, Grease


 
Important Notes:
Performance arms - on-car adjustable camber and toe correction - suits models to - MY02 - MOTORSPORT


 
Front Engine - Pitch Mount - KBR39
Out-of-Stock

Subaru designed the pitch stop mount to assist in controlling the engine and drivetrain forward and aft twisting motion. The pitch stop is inherently soft due to the plastic body and high compliance rubber bushing design and was built for comfort and not responsiveness or feel. It's built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilizing low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings for a faster, responsive feel of power delivery on and off the throttle.
 
Kit Contents:
1 Pitch Mount, Install Guide
.

Notes:
Pitch arm under intercooler

Suitable for SUBARU 2001-2007 (IMPREZA WRX STI GD)